Reviewed ISI Papers List

1- The effects of lime-water on properties of Fe2O3 nano particles blended concrete- ACI Materials Journal.

2- ANN modeling of the early age dynamic Young’s modulus of normal concrete – ACI Materials Journal.

3- Effect of aggregate type on the mechanical properties of RPC- ACI Materials Journal.

4- Strength prediction model for ready mixed concrete with fly ash by statistical analysis- ACI Materials Journal.

5- Shrinkage reducing admixture: effects on the durability of high strength concrete- ACI Materials Journal.

6- Engineering properties of reactive powder concrete without Portland cement- ACI Materials Journal

7- Concrete made with coarse concrete aggregate: Influence of curing on durability- ACI Materials Journal.

8- Effect of Polyvinyl Alcohol on the Hydration of Fly Ash Blended Cement- ACI Structural and Materials Journal

9- Determination of the expansion force of coarse steel slag aggregate- Construction and Building Materials Journal.

10- Splitting tensile strength and modulus of elasticity of self-compacting concrete- Construction and Building Materials Journal.

11- Compliance criteria for strength and durability of concrete- Construction and Building Materials Journal.

12- Compliance criteria for strength and durability of concrete- Construction and Building Materials Journal.

13- Properties and Behavior of Concrete Containing Ternary Binders- Construction and Building Materials Journal.

14- Salt scaling resistance of concrete- the effect of curing and pre-saturation- Construction and Building Materials Journal.

15- The Development of Self Consolidating Concrete’s Mechanical Properties- Construction and Building Materials Journal

16- A Study of the Durability of Recycled Green Building Materials in Lightweight Aggregate Concrete- Construction and Building Materials Journal.

17- Eco-friendly fireproof high-strength polymer cementitious composites- Construction and Building Materials Journal.

18- Mortars of Portland blast-furnace slag activated with water-glass: Effect of slag replacement and alkali concentration- Construction and Building Materials Journal.

19- Performance of Concrete Mixtures Made with Electric Arc Furnace (EAF) Steel Slag Aggregate Produced in the Gulf Region- Construction and Building Materials Journal.

20- Experimental comparison between channel and angle shear connectors under monotonic and fully reversed cyclic loading- Construction and Building Materials Journal.

21- Mechanical characterization of bond interface in repaired concrete- Materials and Design journal.

22- A study of concrete properties using phyllite as coarse aggregates- Materials and Design journal.

23- Anchorage of steel bars in concrete by geopolymer paste- Materials and Design journal.

24- An Experimental Study on Shear Reinforcement in RC Beams Using CFRP- bars- Materials and Design Journal.

25- Compressive strength, Flexural strength and thermal conductivity of autoclaved concrete block made using bottom ash as cement replacement material- Materials and Design Journal.

26- Effect of steel and carbon fiber additions on the dynamic properties of concrete containing silica fume- Materials and Design Journal.

27- Compressive strength and drying shrinkage of fly ash-bottom ash-silica fume multi-blended cement mortars- Materials and Design Journal

28- Establishment of the Durability Indices for Cement-based Composite Containing Supplementary Cementitious Materials- Materials and Design Journal

29- The effect of compressing fresh concrete on hardened concrete density, Materials and Design Journal

30- Compressive behaviour of hybrid fiber-reinforced reactive powder concrete after high temperature- Materials and Design Journal

31- Effect of coarse aggregate blending on short-term mechanical properties of self compacting concrete- Materials and Design Journal

32- Influence of admixtures on the properties of alkali-activated slag mortars subjected to different curing conditions- Materials and Design Journal

33- MICRO AND MACRO LEVEL PROPERTIES OF FLY ASH BLENDED SELF COMPACTING CONCRETE- Materials and Design Journal

34- Reliability analyses of rock slope stability- Journal of Civil Engineering and Architecture.

35- Repair of pre-cracked RC beams using CFRP laminates- Journal of Civil Engineering and Architecture.

36- A design experiment of mortar compressive strength with different water-binder ratio and different ultra-fine fly ash content- Journal of Civil Engineering and Architecture

37- DESIGN OF COST-EFFECTIVE M 25 GRADE OF SELF COMPACTING CONCRETE- Materials and Design Journal

38- Shear strengthening of steel I-beams by using CFRP strips- Journal of Scientific Research and Essays.

39- Mix design and mechanical properties of Oil Palm Shell lightweight aggregate concrete– A Review- International Journal of the Physical Sciences.

40- Compressive strength Characteristics of Cement Mortar Containing Lime and Termite Mound- Journal of Civil Engineering and Construction Technology (JCECT).

41- Comparison of Shear Lag in Structural Steel Building with Frame Tube and Framed Braced- Structural Engineering and Mechanics

42- Engineering properties of alkali-activated binders by use of desulfurization slag and GGBFS- Cement and Concrete Composites

43- Mechanical activation of chemically activated high phosphorous slag content cement- Powder Technology 

44- Effect of Polyvinyl Alcohol on the Hydration of Fly Ash Blended Cement- ACI Structural and Materials Journal

45- Recycled plastic aggregate in mortars composition: effect on physical and mechanical properties – Materials and Design Journal

46- Experimental study on the dynamic compressive mechanical properties of concrete at elevated temperature- Materials and Design Journal

47- Analysis of structures under static loading monotone ascending to ruin- ACI structural and materials journals- 30 July 2013

48- Experimental assessment of angle shear connectors under monotonic and fully reversed cyclic loading in high strength concrete – Construction and Building Materials- 2013

49- Acceleration of hardening using heat treatment of concrete made with mineral admixtures- R. Derabla1, M.L. Benmalek, and F. Sajedi

50- Particle size and specimen preparation effects on the Iowa Pore Index- ACI Materials Journal

51- Portland cement-blast furnace slag mortars activated using waterglass: Effects of temperature and alkali concentration- Construction and Building Materials Journal

52- Mechanical and cementitious characteristics of ground granulated blast furnace slag and basic oxygen furnace slag blended mortar- Materials and Design Journal